View more
Lid Maho 600
- comes from a Swiss state institute (with proof)
- Only individual parts were produced on this machine
- Switch-on hours: 9898
- Production hours approx. 2500
- The machine was completely overhauled at the end of 2011 for 62,000 francs
- The new price of the machine was 180,000 francs
- The machine is in like new condition
Technical specifications:
- X-axis along 600mm
- Y-axis vertical 450mm
- z-axis transverse 450mm
Three-phase motor adjustable 8 kW
at 100% ED 5.5 kW
adjustable three-phase single drives
Horizontal and vertical milling spindle 20-500min
2 switching levels
Main gear:
Right and left rotation
Speed switching
Feed range:
X-, Y- and Z-axis 1-4000mm / min
Hardened flat guide horizontal (X) with steel lamellar cover
Hardened flat guide horizontal (Y) with steel lamellar cover
Hardened prism guide across (Z)
Rapid traverse
lengthways 6 m / min
across 6 m / min
vertical 6 / min
Horizontal work spindle
Milling spindle mounting cone ISO 40 (according to DIN 69871, part 1, pull stud ISO / DIS 7388/11 type B). Automatic tool clamping (hydromechanical)
Vertical milling head
Engi7coi0
Milling spindle mounting cone ISO 40 (according to DIN 69871, part 1, pull stud ISO / DIS 7388/11 type B). Quill stroke 80 mm swiveling ± 60 ° sliding carriage for easy change from vertical to horizontal milling spindle Automatic tool clamping (hydromechanical)
MAHO vertical tool changer
for the automatic tool change in the vertical work spindle. This automatic change system with double gripper is integrated into the machine concept with the disk magazine, easy to use and accessible, and completely separate from the machine work area.
Technical specifications
Magazine type / places disc magazine / 20
Tool shank ISO 40 DIN 69871/1 (pull stud ISO / DIS 7388/11, type B)
max.tool diameter in automatic double change mode up to 0 80 mm
autom. Function as a single gripper for tools larger than 0 80 mm
max. tool diameter
max.tool length max.tool weight
130 mm 80 mm when all spaces are occupied
250 mm (from spindle nose)
6 kg
Electric control cabinet with heat exchanger Individual feed drives via ball screw spindles Photoelectric linear position measuring system, resolution 0.001 mm Screen path control CNC 432 including complete control panel Automatic central lubrication X / Y / Z axis with overload clutch Machine light 220 volts, 2 x 8 watts (1 lamp) Own coolant tank (not in the stand base) has a capacity of approx. 160 liters
Rigid angle table
Clamping area 900 x 480 mm
Number / distance
of the T-slots 14 H7 7/63 mm
Weight about 200kg
Table load max 400 kg
Comfortable operation, independent of the control panel of the CNC 432, is guaranteed by this ergonomically designed manual control panel.
- Axis selection in plus or minus direction for each axis
- Operating mode preselection
- In manual operation, 2 axes can be moved simultaneously after preselection.
- Program creation via PLAYBACK
- machine start
- Feed regulation
- Spindle feed - STOP
- Feed - STOP
- Coolant ON - OFF
- RELEASE tool clamp - CLAMP
- EMERGENCY STOP safety activation
Good condition, fully functional, can be viewed and tried out on site.
Shipping abroad as well.
Sightseeing :
Basically, I would like to point out that the article, in order to rule out misunderstandings, can be viewed and tested under power before buying. Please ask questions before purchasing to avoid confusion.
For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below.
Errors in the description and subject to prior sale.
The VAT will be shown separately on my bills.
Shipping with a forwarding agent.